AT Commands Set

SIM5215_SIM5216 AT Command Manual
AT+CLCC
+CLCC:,,,,[,,[,<
alpha>]][
+CLCC:,,,,[,,[,<
alpha>]]
[...]]
OK
ERROR
+CME ERROR:
Defined values
Integer type, call identification number, this number can be used in +CHLD command operations.
0 – mobile originated (MO) call
1 – mobile terminated (MT) call
State of the cal:
0 – active
1 – held
2 – dialing (MO call)
3 – alerting (MO call)
4 – incoming (MT call)
5 – waiting (MT call)
bearer/teleservice:
0 – voice
1 – data
2 – fax
9 – unknown
0 – call is not one of multiparty (conference) call parties
1 – call is one of multiparty (conference) call parties
String type phone number in format specified by .
Type of address octet in integer format;
128 – Restricted number type includes unknown type and format
145 – International number type
161 – national number.The network support for this type is optional
177 – network specific number,ISDN format
129 – Otherwise
SIM5215_SIM5216_AT Command Manual_V1.13 148
1/13/2011