AT Commands Set

SIM5215_SIM5216 AT Command Manual
1 – MT buffer of unsolicited result codes defined within this command is flushed to the TE
when 1 or 2 is entered (OK response shall be given before flushing the codes).
The following unsolicited result codes and the corresponding events are defined:
+CGEV: REJECT ,
A network request for PDP context activation occurred when the MT was unable to
report it to the TE with a +CRING unsolicited result code and was automatically
rejected.
+CGEV: NW REACT , , []
The network has requested a context reactivation. The that was used to reactivate
the context is provided if known to the MT.
+CGEV: NW DEACT , , []
The network has forced a context deactivation. The that was used to activate the
context is provided if known to the MT.
+CGEV: ME DEACT , , []
The mobile equipment has forced a context deactivation. The that was used to
activate the context is provided if known to the MT.
+CGEV: NW DETACH
The network has forced a Packet Domain detach. This implies that all active contexts
have been deactivated. These are not reported separately.
+CGEV: ME DETACH
The mobile equipment has forced a Packet Domain detach. This implies that all active
contexts have been deactivated. These are not reported separately.
+CGEV: NW CLASS
The network has forced a change of MS class. The highest available class is reported
(see AT+CGCLASS).
+CGEV: ME CLASS
The mobile equipment has forced a change of MS class. The highest available class is
reported (see AT+CGCLASS).
Examples
AT+CGEREP=?
+CGEREP: (0-2),(0-1)
OK
AT+CGEREP?
+CGEREP: 0,0
OK
17.12 AT+CGREG GPRS network registration status
Description
SIM5215_SIM5216_AT Command Manual_V1.13 285
1/13/2011