AT Commands Set

SIM5215_SIM5216 AT Command Manual
0 – -113 dBm or less
1 – -111 dBm
2...30 – -109... -53 dBm
31 – -51 dBm or greater
99 – not known or not detectable
(in percent)
0 – =8.0%
99 – not known or not detectable
Examples
AT+CSQ
+CSQ: 22,0
OK
10.7 AT+AUTOCSQ Set CSQ report
Description
The command causes the module to disable and enable auto report CSQ information, if we enable
auto report, the module reports CSQ information every five seconds or only after changing,
the format of report is “+CSQ: ,”.
SIM PIN
NO
References
Vendor
Syntax
Test Command
AT+AUTOCSQ=?
Read Command
AT+AUTOCSQ?
Write Command
Responses
+AUTOCSQ: (list of supporteds),(list of supporteds)
OK
Responses
+AUTOCSQ: ,
OK
Responses
SIM5215_SIM5216_AT Command Manual_V1.13 187
1/13/2011