AT Commands Set

SIM5215_SIM5216 AT Command Manual
Test Command
AT+CCAMSETZ=?
Write Command
AT+CCAMSETZ=
Responses
+CCAMSETZ:(-),()
OK
Responses
OK
If camera in a wrong state:
CAMERA INVALID STATE
ERROR
If camera not starting:
CAMERA NOT START
ERROR
Defined values
Range is 0-91 (0 is the lowest, 91 is the highest).
The minimum of zoom for current dimension.
The maximum of zoom for current dimension.
The current zoom value.
NOTE
1. Before set the zoom for camera, please check response of command (AT+CCAMSETZ=?).
Current value will be set instead of your set if out of current range limits.
2. is different to each image dimension.
Examples
AT+CCAMSETZ=?
+CCAMSETZ:(0-30)(0)
OK
AT+CCAMSETZ=15
OK
7.10 AT+CCAMTP Take picture
Description
SIM5215_SIM5216_AT Command Manual_V1.13 112
1/13/2011