AT Commands Set

SIM5215_SIM5216 AT Command Manual
+CMGR: "STO UNSENT","+10011",,145,17,0,0,167,"+8613800100500",145,4
Hello World
OK
6.12 AT+CMGS Send message
Description
The command is used to send message from a TE to the network (SMS-SUBMIT).
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command
AT+CMGS=?
Write Command
If text mode (AT+CMGF=1):
AT+CMGS=[,]<
CR>Text is entered.
If PDU mode(AT+CMGF=
0):
AT+CMGS=
PDU is entered
Responses
OK
Responses
If text mode (AT+CMGF=1) and sending successfully:
+CMGS:
OK
If PDU mode(AT+CMGF=0) and sending successfully:
+CMGS:
OK
If sending fails:
ERROR
If sending fails:
+CMS ERROR:
Defined values
Destination-Address, Address-Value field in string format; BCD numbers (or GSM 7 bit default
alphabet characters) are converted to characters of the currently selected TE character set, type of
address given by .
TP-Destination-Address, Type-of-Address octet in integer format. (when first character of is +
(IRA 43) default is 145, otherwise default is 129).
integer type value indicating in the text mode (AT+CMGF=1) the length of the message body
> (or ) in characters; or in PDU mode (AT+CMGF=0), the length of the actual TP
data unit in octets. (i.e. the RP layer SMSC address octets are not counted in the length)
SIM5215_SIM5216_AT Command Manual_V1.13 91
1/13/2011