AT Commands Set

SIM5215_SIM5216 AT Command Manual
+CFTPSPUTFILE:
ERROR
ERROR
OK
+CFTPSPUTFILE:
Defined values
The remote file path. When the file path doesn’t contain “/”, this command transfers file to the
current remote FTPS directory. If the file path contains non-ASCII characters, the file path
parameter should contain a prefix of {non-ascii}.
The directory that contains the file to be uploaded:
0 – current directory [refer to AT+FSCD]
1 – “C:/Picture” directory
2 – “C:/Video” directory
3 – “C:/VideoCall” directory
4 – “D:/Picture” directory
5 – “D:/Video” directory
6 – “D:/VideoCall” directory
7 – “C:/Audio” directory
8 – “D:/Audio” directory
The error code of FTPS operation.
Examples
AT+CFTPSPUTFILE=”/pub/mydir/test1.txt”,1
OK
AT+CFTPSPUTFILE=” test2.txt”,1
OK
…
+CFTPSPUTFILE: 0
AT+CFTPSPUTFILE={non-ascii}” B2E2CAD42E747874”,1
OK
…
+CFTPSPUTFILE: 0
AT+CFTPSPUTFILE=?
+CFTPSPUTFILE: [{non-ascii}]“FILEPATH”,(0-8)
OK
20.6.14 AT+CFTPSGET Get a file from FTPS server to serial port
SIM5215_SIM5216_AT Command Manual_V1.13 369
1/13/2011