AT Commands Set

SIM5215_SIM5216 AT Command Manual
Parameter specifies the password used for authentication. It is required for the authentication types
PAP and CHAP.
Parameter specifies the user name used for authentication. It is required for the authentication type
PAP.
Examples
AT+CSOCKAUTH=?
+CSOCKAUTH: (1-16),(0-2), ,
OK
AT+CSOCKAUTH=1,1,”SIMCOM”,”123”
OK
18.4 AT+IPADDR Inquire socket PDP address
Description
The command inquires the IP address of current active socket PDP.
SIM PIN
YES
References
Vendor
Syntax
Test Command
AT+IPADDR=?
Execution Command
AT+IPADDR
Responses
OK
Responses
+IPADDR: < ip_address>
OK
+IP ERROR:
ERROR
ERROR
Defined values
A string parameter that identifies the IP address of current active socket PDP.
A string parameter that displays the cause of occurring error.
Examples
AT+IPADDR
SIM5215_SIM5216_AT Command Manual_V1.13 294
1/13/2011