AT Commands Set

SIM5215_SIM5216 AT Command Manual
AT+CFTPPUTFILE={non-ascii}” B2E2CAD42E747874”,1
OK
…
+CFTPPUTFILE: 0
AT+CFTPPUTFILE=?
+CFTPPUTFILE: [{non-ascii}]“FILEPATH”,(0-8)
OK
20.3.9 AT+CFTPGET Get a file from FTP server and output it from SIO
Description
The command is used to get a file from FTP server and output it to serial port. This command
may have a lot of DATA transferred to DTE using serial port, The AT+CATR command is
recommended to be used.
SIM PIN
YES
References
Vendor
Syntax
Test Command
AT+CFTPGET=?
Write Command
AT+CFTPGET=
“”
Responses
+CFTPGET: [{non-ascii}] “FILEPATH”
OK
Responses
OK
+CFTPGET: DATA,
…
+CFTPGET: DATA,
…
…
+CFTPGET: 0
+CME ERROR
+CFTPGET: DATA,
…
+CFTPGET: DATA,
…
…
+CFTPGET:
Defined values
The remote file path. When the file path doesn’t contain ”/”, this command transfer file from the
current remote FTP directory. If the file path contains non-ASCII characters, the file path parameter
SIM5215_SIM5216_AT Command Manual_V1.13 349
1/13/2011