AT Commands Set

SIM5215_SIM5216 AT Command Manual
The command refers to CLIR-service that allows a calling subscriber to enable or disable the
presentation of the CLI to the called party when originating a call.
Write command overrides the CLIR subscription (default is restricted or allowed) when temporary
mode is provisioned as a default adjustment for all following outgoing calls. This adjustment can be
revoked by using the opposite command.. If this command is used by a subscriber without
provision of CLIR in permanent mode the network will act.
Read command gives the default adjustment for all outgoing calls (given in ), and also triggers
an interrogation of the provision status of the CLIR service (given in ).
Test command returns values supported as a compound value.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CLIR =?
Read Command
AT+CLIR?
Responses
+CLIR: (list of supported s)
OK
Responses
+CLIR: ,
OK
ERROR
+CME ERROR:
Write Command
AT+CLIR =
Responses
OK
ERROR
+CME ERROR:
Defined values
0 – presentation indicator is used according to the subscription of the CLIR service
1 – CLIR invocation
2 – CLIR suppression
0 – CLIR not provisioned
1 – CLIR provisioned in permanent mode
2 – unknown (e.g. no network, etc.)
3 – CLIR temporary mode presentation restricted
4 – CLIR temporary mode presentation allowed
Examples
SIM5215_SIM5216_AT Command Manual_V1.13 135
1/13/2011