AT Commands Set

SIM5215_SIM5216 AT Command Manual
17 Commands for Packet Domain
17.1 AT+CGDCONT Define PDP context
Description
The set command specifies PDP context parameter values for a PDP context identified by the
(local) context identification parameter . The number of PDP contexts that may be in a
defined state at the same time is given by the range returned by the test command. A special form of
the write command (AT+CGDCONT=) causes the values for context to become
undefined.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGDCONT=?
Read Command
AT+CGDCONT?
Write Command
AT+CGDCONT=
[,
[,[,
[,[,]]]]]
Execution Command
AT+CGDCONT
Responses
+CGDCONT: (range of supporteds),,,,(list of
supported s),(list of supported s)
OK
ERROR
Responses
+CGDCONT: [, , ,,
, [
+CGDCONT: , , , ,
, [...]]]
OK
ERROR
Responses
OK
ERROR
Responses
OK
ERROR
Defined values
(PDP Context Identifier) a numeric parameter which specifies a particular PDP context definition.
SIM5215_SIM5216_AT Command Manual_V1.13 264
1/13/2011