AT Commands Set

SIM5215_SIM5216 AT Command Manual
+CME ERROR:
Defined values
Parameter specifies a particular PDP context definition. This is also used in other PDP
context-related commands.
1…16
Indicates the types of authentication to be used for the specified context. If CHAP is selected
another parameter needs to be specified. If PAP is selected two additional parameters
and need to specified.
0 – none
1 – PAP
2 – CHAP
Parameter specifies the password used for authentication. It is required for the authentication types
PAP and CHAP.
Parameter specifies the user name used for authentication. It is required for the authentication type
PAP.
Examples
AT+CGAUTH=?
+CGAUTH: (1-16),(0-2),
OK
AT+CGAUTH=1,1,”SIMCOM”,”123”
OK
SIM5215_SIM5216_AT Command Manual_V1.13 289
1/13/2011