AT Commands Set

SIM5215_SIM5216 AT Command Manual
is DTMFs tone from remote
party, and consisted of (0-9, *, #).
NOTE DTMFs are sent as an H.245 User Input
Indication message (basic string).
23.5.2 Call flows – video call origination
Commands and Responses
AT+VPSOURCE=2,”pic.jpg”
OK
AT+VPRECORD=3
OK
AT+VPMAKE=”123456789”
VPACCEPT
OK
VPRINGBACK
VPSETUP
VPCONNECTED
AT+VPRECORD=0
OK
AT+VPSOURCE=1
OK
AT+VPRECORD=1
OK
AT+VPRECORD=0
OK
AT+VPEND
OK
VPEND
Comments
Set TX source
Start recording video
Make video call
Stop recording video
Switch TX source
Start recording video
Stop recording video
End video call
23.5.3 Call flows – video call termination
Commands and Responses
VPINCOM 987654321
AT+VPSOURCE=2,”pic.jpg”
OK
AT+VPRECORD=3
OK
AT+VPANSWER
OK
VPSETUP
Comments
Report incoming call
Set TX source
Start recording video
Answer video call
SIM5215_SIM5216_AT Command Manual_V1.13 413
1/13/2011