FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

3. FILE OPERATIONS
3.10 Decoding E-mail Attachment
When you can't read an e-mail attachment because it has been coded by MIME
(Multipurpose Internet Mail Extensions), you may decode it as below.
1. Save the MIME-coded file to a floppy disk. (See paragraph 4.2.5 for the
procedure.) This step is not necessary if Auto Receive Message Save is
turned on in the Auto Mode Setup menu.
2. Press the [F1] key to open the File menu.
3. Press the [9] key to choose MIME(Decode).
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
File
1. New ALT-N
Decode
[A:\E0970715 ]
2. Open ALT-O
3. Close
Filename
ALT-Q
Size Date & Time
4.
E0970715.001 868 02-02-25 02:33
Save ALT-S
E0970715.002 372 02-02-25 02:52
5. E0970715.003
Delete ALT-D
6. E0970715.004
Rename
6794
864
02-02-25 02:59
02-02-25 03:13
7. Print ALT-P
8. Format 4 Disk Files exist 579584 bytes free
To View: SPACE Make Dir: INS Remove Dir: DEL
9. MIME (Decode)
Decode window
4. Press the [↑] or [↓] key to choose the file you want to decode.
5. Press the [Enter] key.
File chosen at step 4
MIME Decode
Checking 'E0970715.001' . . .
Decode 'ABC.ini'?
Yes
Decode
No
File attachment
Decode window
6. Yes is selected; press the [Enter] key to decode the file.
File
1. New ALT-N
Save
[A:\ABC.ini ]
2. Open ALT-O
3. Close
Filename
ALT-Q
Size Date & Time
4.
E0970715.001
Save ALT-S
868 2002-02-25 02:33
E0970715.002 372 2002-02-25 02:52
5. E0970715.003
Delete ALT-D
6. E0970715.004
Rename
6794
864
2002-02-25 02:59
2002-02-25 03:13
7. Print ALT-P
8. Format 4 Disk Files exist 579584 bytes free
To View: SPACE Make Dir: INS Remove Dir: DEL
9. MIME (Decode)
Save window
3-20