FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

2. SYSTEM INITIALIZATION
2.1.2 System setup
The System Setup menu provides for input of date, time, operating mode, and
port function.
1. Press the [F8] key to choose the Setup menu.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Directories
9. Configuration
Setup menu
2. Press the [2] key to display the System Setup menu.
Entered at installation
(Cannot be changed.)
Setup
System Setup
System Date & Time 03:11 02-02-25 (YY-MM-DD)
IMN
MES Operation Mode INMARSAT-C
Nav Port
OFF
Active Port
INT
Message Output Port INT
EGC Output Port INT
9. Network Configuration Setup
Command Window
System setup menu
3. System Date & Time is selected; press the [Enter] key to open the date entry
window.
Setup
System Setup
System Date & Time 02-02-25 (YY-MM-DD)
IMN
MES Operation Mode INMARSAT-C
Nav Port
OFF
Active Port
INT
Message Output Port INT
EGC Output Port INT
9. Network Configuration Setup
Command Window
System setup menu, date entry window
4. Enter the date with the numeric keys. (Entry of date is not necessary if a GPS
navigator is connected to the FELCOM 15.)
5. Press the [Enter] key to close the window. (Note that the IMN is entered
during installation. The IMN window cannot be opened.)
6. Press the [↓] key twice to choose MES Operation Mode.
2-2