FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

5. DATA REPORTING AND POLLING
13. Choose DNID desired and press the [Enter] key. (LES ID and Member No.
are automatically selected according to DNID.)
14. Press the [↓] key to choose Activation.
15. Press the [Enter] key to open the activation options window.
16. Press the [↓] or [↑] key to choose “Regular Interval” or “Daily” as appropriate.
17. Press the [Enter] key to close the window.
18. Do one of the following depending on the selection you made at step 16.
“Regular Interval” selected at step 16
(1) Press the [↓] key to choose Interval Time.
(2) Press the [Enter] key to open the interval time entry window.
(3) Key in the interval time. The interval should be at least 10 minutes.
(4) Press the [Enter] key to close the window.
(5) Press the [↓] key to choose Report Times.
(6) Press the [Enter] key to open the report times entry window.
(7) Key in the report times, or press the [Back Space] key to display “---“ to
choose “No Limit” to transmit data until the “Status” setting is turned OFF.
(8) Press the [Enter] key to close the window.
“Daily” selected at step 16
(1) Press the [↓] key to choose Start Time 1.
(2) Press the [Enter] key to open the start time entry window.
(3) Key in the start time, in 24-hour notation.
a) (4) Press the [Enter] key to close the window.
(5) If necessary key in start times for Start Time 2-4.
19. Press the [Esc] key to show the update window.
Data Report
Data Report Programming
Status
Report Length
Destination
DNID
LES ID
Member No.
Activation
Interval Time
Report Times
Start Time1 --:--
Start Time2 --:--
Start Time3 --:--
Start Time4 --:--
OFF
Position and Course/Speed
Regular Interval
01:00
24 (---: No Limit)
Yes
Update
Data report menu (regular interval reporting)
20. Yes is selected; press the [Enter] key to register settings.
21. Press the [Esc] key twice to return to the standby display.
No
5-3