FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9. MAINTENANCE, TROUBLESHOOTING<br />
9.7.2 Warning messages<br />
Messages in this category are prefixed with “WARNING:”<br />
Warning messages<br />
Error Message Meaning Action<br />
BBER over 80%.<br />
Scanning NCS start<br />
manually.<br />
BBER (Bulletin Board Error<br />
Rate) exceeded 80%.<br />
Select NCS manually.<br />
Cannot enter new<br />
DNID. Memory full for<br />
DNIDs.<br />
Cannot enter new<br />
ENID. Memory full for<br />
ENIDs.<br />
Cannot find NCS CC in<br />
all region. Scanning is<br />
continued.<br />
Cannot find NCS CC in<br />
preferred region.<br />
Scanning all region is<br />
started.<br />
External NAV<br />
equipment failure.<br />
Internal GPS UNIT<br />
failure.<br />
Synchronization loss.<br />
Please change EGC<br />
channel.<br />
Synchronization loss.<br />
Please check the<br />
current ocean region.<br />
Memory for DNIDs is full.<br />
Memory for ENIDs is full.<br />
No NCS found in region.<br />
NCS could not be found in<br />
region selected. Scanning<br />
started to find NCS.<br />
No navigation data from<br />
navigator.<br />
GPS signal could not be<br />
detected.<br />
Your station is not<br />
synchronized with selected<br />
EGC channel.<br />
Your station is not<br />
synchronized with selected<br />
NCS.<br />
Delete unnecessary<br />
DNIDs to enter new ones.<br />
Delete unnecessary<br />
ENIDs to enter new ones.<br />
Scanning automatically<br />
continues.<br />
If NCS could not be<br />
found, contact you dealer<br />
for advice.<br />
Check navigator.<br />
Internal GPS receiver<br />
may be damaged if this<br />
message appears<br />
frequently. Contact your<br />
dealer for advice.<br />
Change EGC channel.<br />
Change NCS.<br />
9-<strong>10</strong>