FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. FILE OPERATIONS<br />
3.4 Opening Files<br />
3.4.1 Opening files<br />
1. Set the floppy disk containing the file you wish to open in the disk drive.<br />
2. Press the [F1] key to display the File menu.<br />
3. Press the [2] key. The screen shows a list of the files stored in the floppy disk.<br />
4. Press the [↓] or [↑] key to choose a file.<br />
To view a portion of a file, press the space bar. After confirming, press the [Esc]<br />
key.<br />
File<br />
1. New ALT-N Open<br />
2. Open ALT-O<br />
SEIZOU<br />
3. Close THE FURUNO ALT-Q<strong>FELCOM</strong> INMARSAT STANDARD C MOBILE EARTH STATION, A<br />
4. Save SATELLITE ALT-S COMMUNICATIONS UNIT PACKAGE FOR VIRTUALLY EVERY VESSEL.<br />
UNIT<br />
5. Delete ALT-D<br />
6. Rename<br />
7. Print<br />
ALT-P<br />
8. Format Disk<br />
9. MIME (Decode)<br />
5. Press the [Enter] key.<br />
Partial view of a file<br />
A few moments later the contents of the file appear on the screen and the<br />
title bar shows the file name. You may repeat this procedure to load a second<br />
file into a working area.<br />
3.4.2 Switching between files<br />
You can switch between files by pressing the [9] key (Change Window) on the<br />
Edit menu ([F2]), or pressing Alt+V on the editor screen.<br />
ABC<br />
FURUNO<br />
1<br />
2<br />
[F2]<br />
9: Change Window<br />
or [ALT] + [V]<br />
How to alternate display of files in working area 1 and 2.<br />
How to switch between files<br />
3-14
Change language