FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4. INMARSAT C COMMUNICATIONS<br />
13. Press the [Enter] key to open the confirmation window.<br />
14. To request notification of delivery from the LES, choose ON. If not necessary<br />
choose OFF.<br />
<strong>15</strong>. Press the [Enter] key to close the window.<br />
16. Press the [↓] key to choose Send Delay.<br />
17. Press the [Enter] key to open the send delay entry window.<br />
18. To send a message after a certain delay, enter a time up to 99 hours 59<br />
minutes. (The Send Delay is used to time message arrival to suit recipient’s<br />
office hours.)<br />
19. Press the [Enter] key to close the window.<br />
20. Press the [↓] key to choose Delivery Delay.<br />
21. Press the [Enter] key to open the delivery delay options window.<br />
22. Delivery Delay requests the LES for “Immediate” or “Deferred” transmission<br />
to the recipient designated. Press the [↑] or [↓] key to choose Immediate or<br />
Deferred. For information on this service, consult with LES where message is<br />
to be sent.<br />
23. Press the [Enter] key to close the window.<br />
24. Press the [↓] key to choose Code and press the [Enter] key.<br />
25. Press the [↑] or [↓] key to choose “IA5 (for e-mail, fax) ”, “ITA2 (for telex)”<br />
“DATA” or “SMS” as appropriate.<br />
26. Press the [Enter] key to close the window.<br />
27. Press the [↓] key to place the cursor on TRANSMIT.<br />
28. Press the [Enter] key to open the start window.<br />
Date<br />
97-08-04 Transmit Message BBER<br />
Time Priority<br />
Message File<br />
01:32 (UTC) Normal<br />
SEISETU.TXT<br />
C/N<br />
Send level Size 46<br />
Position Station Name LAT FURUNO RxIF AGC Cost ********.** Level (US$)<br />
Destination Type LON TELEX<br />
REF Offset Freq<br />
Waypoint Prefix Code LAT<br />
Synthe 1st local<br />
Country/Ocean Code LON<br />
Course Station ID<br />
Speed Modem Type<br />
81<br />
321 DEG<br />
KTS<br />
3rd local<br />
Synthesizer<br />
TX2nd Local<br />
Current Address NCS<br />
Current Subject Channel<br />
Current Attach TDM File<br />
344 (IOR) LOGOUT<br />
NCS CC<br />
NCS CC<br />
Antenna Power Supply<br />
Water Temperature<br />
MES LES Status ID<br />
GPS Option Status<br />
Idle<br />
****<br />
303 (KDDI) Water Current<br />
Direction<br />
Start<br />
Confirmation ON<br />
Speed Yes No<br />
DCE Send Memory Delay<br />
Delivery Delay<br />
Code<br />
[ TRANSMIT ]<br />
3281800:00<br />
Bytes free<br />
Immediate<br />
IA5<br />
Depth<br />
Transmit message screen<br />
29. Press the [Enter] key to send the message to the message queue. (To<br />
escape, choose “No” and press the [Enter] key.) The message “Message is<br />
entered in sending Queue. Press any key.” appears.<br />
Note 1: If some data has not been entered, the message “Input Error: xx.”<br />
(xx: error content) appears.<br />
Note 2: When you send a message which contains more than 32 KB of data,<br />
the message “Message file is too large (but sent only with 32 KB).”<br />
4-6