FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

3. FILE OPERATIONS
3.2.3 Editor menu setup
The Editor menu sets the parameters of the text editor.
1. Press the [F8] key to display the Setup menu.
2. Press the [3] key to display the Editor Setup menu.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Setup
Editor Setup
2. Text System Mode Setup Ascii
3. Editor Mode Setup Insert
4. Word Terminal Wrap Setup ON
5. Line EGC No. Setup ON
6. Tab Auto Width Mode Setup4 Char
7. Column E-Mail Setup Width 69
8. Cursor Directories Type Block
9. Scroll Configuration Full Screen
Editor setup menu
3. The illustration above shows the default editor setup settings. To change
settings:
a) Press the [↓] or [↑] key to choose item.
b) Press the [Enter] key to open corresponding options window.
c) Choose setting with the [↓] or [↑] key.
d) Press the [Enter] key to register setting.
e) Press the [Esc] key twice to return to the standby display.
Text Mode:
Edit Mode:
Word Wrap:
Line No.:
Tab Width:
Column Width:
Cursor Type:
Scroll:
Choose “Telex” when creating a telex message. Only upper
case alphabet is permitted in telex. Use “ASCII” when
creating an e-mail message. Upper and lower case alphabet
may be used in an e-mail.
Choose “Insert” (insert character at cursor location) or
“Overwrite” (write over character at cursor location).
Turns on/off automatic hyphenation at the end of a line.
Turns line number display on or off.
Sets horizontal tab width; two, four or eight tabs per line.
Choose 69 for Telex or 40 to 80 for ASCII.
Chooses cursor configuration, “■“ or underline.
Sets how much the screen moves up over the page (Full
Screen or Half Screen) when [PgUp] or [PgDn] key is
operated.
3-4