FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SAFETY INSTRUCTIONS<br />
WARNING<br />
Do not open the equipment.<br />
Hazardous voltage which can<br />
cause electrical shock, burn<br />
or serious injury exists inside<br />
the equipment. Only qualified<br />
personnel should work inside<br />
the equipment.<br />
Hazardous microwave.<br />
Do not approach within<br />
60 cm of the antenna radome<br />
when it is transmitting.<br />
Microwave radiation can be<br />
harmful to the human body,<br />
particularly the eyes.<br />
WARNING<br />
Do not operate the equipment with<br />
wet hands.<br />
Electrical shock may result.<br />
CAUTION<br />
Use the proper fuse.<br />
Use of a wrong fuse can result in fire or<br />
permanent damage to the equipment.<br />
This equipment is intended for marine<br />
application.<br />
Radiation Level At<br />
2<br />
<strong>10</strong>W/m 0.6 m<br />
WARNING LABEL<br />
Leave the equipment powered while<br />
underway. (For antenna maintenance<br />
and the like, turn off the power at the<br />
mains switchboard.)<br />
Distress cannot be communicated unless<br />
the equipment is powered.<br />
Do not disassemble or modify the<br />
equipment.<br />
Fire, electrical shock or serious injury can<br />
result.<br />
Turn off the power immediately at the<br />
ship's mains switchboard if water<br />
leaks into the equipment or the equipment<br />
is emitting smoke or fire.<br />
Continued use of the equipment can cause<br />
fire or electrical shock. Contact your<br />
dealer for advice.<br />
Do not locate the terminal unit near<br />
water or places subject to water splash.<br />
Electrical shock, fire or personal injury may<br />
resullt<br />
Any repair work must be done by a<br />
licensed radio technician.<br />
Improper repair work can cause electrical<br />
shock or fire.<br />
A warning label is attached to the<br />
terminal unit. Do not remove the label.<br />
If the label is missing or damaged,<br />
contact your dealer about replacement.<br />
WARNING<br />
To avoid electrical shock, do not<br />
remove cover. No user-serviceable<br />
parts inside.<br />
Name: Warning Label (2)<br />
Type: 03-129-<strong>10</strong>01-1<br />
Code No.: <strong>10</strong>0-236-741<br />
ii