FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

4. INMARSAT C COMMUNICATIONS
4.1.6 Accessing the 2-digit code services
A range of special safety and general maritime services, known as the 2-digit
code services, may be transmitted. The list on the next page shows the 2-digit
code services available.
To access a 2-digit code service do the following:
1. Using the text editor, prepare message requesting a 2-digit code service.
2. Press the [F3] key to open the Transmit menu.
3. Press the [1] key to display the Transmit Message menu.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Transmit
1. Transmit Message
2. Priority Cancel
Transmit Message
Normal
3. Message Request File Delivery Status Message now being edited Size 24
Station Name
Cost ********.**(US$)
Destination Type TELEX
Prefix Code
Country/Ocean Code
Station ID
Modem Type
---- * ---------+---------+---------+---------+---------+---------+---------<
Address
Subject
25 Char. [ Line 2/ 2 Col. 1 ] [Insert ]
Attach File
LES ID
Option
Confirmation
Send Delay
Delivery Delay
Code
ON
00:00
Immediate
IA5
[ TRANSMIT ]
Transmit message menu
4. Press the [↓] key three times to choose Destination Type.
5. Press the [Enter] key to open the destination type options window.
6. Press the [↓] or [↑] key to choose SPEC (Special).
7. Press the [Enter] key to close the window.
8. Press the [↓] key to choose Station ID.
9. Press the [Enter] key to open the station ID entry window.
10. Key in 2-digit code referring to the table on the next page.
11. Press the [Enter] key to close the window.
4-20