FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1. OPERATIONAL OVERVIEW<br />
1.3 Distress Alert/Received Call Unit IC-305, Alarm<br />
Unit IC-306<br />
Distress Alert/Received Call Unit IC-305<br />
The [DISTRESS] button functions to transmit the distress alert. To transmit the<br />
distress alert, press the button until its lamp lights continuously. For further<br />
details on how to transmit the distress alert, see paragraph 6.1.<br />
The IC-305 releases the audio alarm and the lamp in the [ALARM ACK] button<br />
flashes when an EGC distress or urgency broadcast is received. Press the<br />
[ALARM ACK] button to acknowledge the alarm, and the alarm tone changes. To<br />
silence the alarm and extinguish the lamp, press the function key F<strong>10</strong> on the<br />
keyboard of the terminal unit.<br />
Alarm Unit IC-306<br />
The IC-306 releases the audio alarm and flashes the lamp in its [ALARM<br />
RESET] button when a telex or e-mail is received. To silence the audio alarm in<br />
this case, press the [ALARM RESET] button on the IC-306. In addition to telex or<br />
e-mail notification, the audio alarm sounds and the lamp flashes also for the<br />
equipment trouble listed below. To acknowledge this alarm, press the [ALARM<br />
RESET] button, and the alarm tone changes. To silence the alarm and flashing<br />
of the button in case of external equipment abnormality, press the [F<strong>10</strong>] key on<br />
the keyboard.<br />
• “Unsync” condition (MES is not synchronized with satellite) continues for six<br />
minutes. (UNSYNC appears at the bottom of the screen.)<br />
• BBER is over 80% (BBER of 080 or higher appears on the system status<br />
monitor.)<br />
Note: The equipment cannot scan automatically in the above two situations.<br />
Reselect ocean region referring to paragraph 7.2.<br />
• Printer has no paper<br />
• No data is received from internal or external GPS navigator<br />
• Update position alert (manual position input) when position has not been<br />
updated for four hours.<br />
• Equipment trouble (synthesizer, oscillator, etc.)<br />
MES ALARMS AND<br />
INCOMING MESSAGES<br />
ACK<br />
ALARM UNIT<br />
I<br />
Distress Alert/Received Call Unit<br />
IC-305<br />
Alarm Unit<br />
IC-306<br />
Distress Alert/Received Call Unit IC-305, Alarm Unit IC-306<br />
1-6