FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

More documents

Recommendations

Info

2. SYSTEM INITIALIZATION <strong>15</strong>. Press the [Enter] key to open the active port options window. Setup System Date & Time IMN MES Operation Mode Nav Port Active Port Message Output Port EGC Output Port 9. Network Configuration Setup Command Window System Setup 01:53 02-02-25 (YY-MM-DD) INMARSAT-C OFF INT DTE1 ALL DTE1 System setup menu, active port options window 16. Press the [↓] or [↑] key to choose active port (terminal unit); “INT” or “ALL” as appropriate. INT: Use main terminal unit. ALL: Use the terminal unit (PC, etc.) connected to the DTE port on the main terminal. 17. Press the [Enter] key to close the window. 18. Press the [↓] key to choose Message Output Port. 19. Press the [Enter] key to open the message output port options window. Setup System Setup System Date & Time 01:53 02-02-25 (YY-MM-DD) IMN MES Operation Mode INMARSAT-C Active Port INT Nav Port OFF Message Output Port DTE1 INT EGC Output Port EXT 9. Network Configuration Setup INT+EXT Command Window AUTO System setup menu, message output port options window 20. Press the [↓] or [↑] key to choose the terminal unit where you want to route received messages. INT: All received messages are routed to the main terminal. EXT: All received messages are routed to the terminal unit connected to the DTE port on the main terminal unit. INT+EXT: All received messages are routed to both the main and external terminal units. AUTO: The sub address for the DTE port is 001. Received messages having the sub address of 001 are routed to the DTE terminal. Messages having a sub address other than 001 are routed to the main terminal. 21. Press the [Enter] key to close the window. 22. Press the [↓] key to choose EGC Output Port. 2-4
2. SYSTEM INITIALIZATION 23. Press the [Enter] key to open the EGC output port options window. Setup System Date & Time IMN MES Operation Mode Nav Port Active Port Message Output Port EGC Output Port 9. Network Configuration Setup Command Window System Setup 01:53 02-02-25 (YY-MM-DD) INMARSAT-C OFF INT INT INT INT+EXT System setup menu, EGC output port options window 24. Press the [↓] or [↑] key to choose the terminal unit where to route receive EGC messages; INT, main terminal; INT+EXT, main and auxiliary terminals. 25. Press the [Enter] key to close the window. 26. Press the [Esc] key to open the update window. See paragraph 2.1.3 Not used. Setup System Setup System Date & Time 01:53 02-02-25 (YY-MM-DD) IMN MES Operation Mode Nav Port INMARSAT-C OFF Active Port INT Message Output Port INT Update EGC Output Port INT 9. Network Configuration Setup Command Window Yes No System setup menu, update window 27. Yes is selected; press the [Enter] key to update system settings. 28. Press the [Esc] key to return to the standby display. 2-5
Page 1 and 2: OPERATOR'S MANUAL INMARSAT-C MOBILE
Page 3 and 4: IMPORTANT NOTICES General • The o
Page 5 and 6: TABLE OF CONTENTS FOREWORD ........
Page 7 and 8: 4.2.4 Automatically printing receiv
Page 9 and 10: FOREWORD Introduction FURUNO Electr
Page 11 and 12: SYSTEM CONFIGURATION ANTENNA UNIT I
Page 13 and 14: INMARSAT C SYSTEM Inmarsat C System
Page 15 and 16: Communications Network INMARSAT C S
Page 17 and 18: LRIT COMPLIANCE This equipment can
Page 19 and 20: 1. OPERATIONAL OVERVIEW 1.1 Termina
Page 21 and 22: 1.2 Keyboard The FELCOM 15 is almos
Page 23 and 24: 1.2.2 Shortcut keys The FELCOM 15 p
Page 25 and 26: 1.4 Printer PP-510 (option) 1. OPER
Page 27 and 28: 1. OPERATIONAL OVERVIEW 1.5.1 Displ
Page 29 and 30: 1. OPERATIONAL OVERVIEW PV TEST CAL
Page 31 and 32: 1.6 Menu Overview 1. OPERATIONAL OV
Page 33 and 34: 1.8 Using a PC (local supply) When
Page 35 and 36: 1. OPERATIONAL OVERVIEW 6. Click th
Page 37 and 38: 1. OPERATIONAL OVERVIEW 1.8.2 Start
Page 39 and 40: • Backing up the System System da
Page 41 and 42: 2. SYSTEM INITIALIZATION This chapt
Page 43: 2. SYSTEM INITIALIZATION 7. Press t
Page 47 and 48: 2. SYSTEM INITIALIZATION 14. You ma
Page 49 and 50: 2. SYSTEM INITIALIZATION Note: The
Page 51 and 52: 2.4 EGC Settings 2.4.1 What is the
Page 53 and 54: 2. SYSTEM INITIALIZATION 2.4.2 EGC
Page 55 and 56: 2. SYSTEM INITIALIZATION 11. Press
Page 57 and 58: 2. SYSTEM INITIALIZATION 5. Press t
Page 59 and 60: 2. SYSTEM INITIALIZATION Automatica
Page 61 and 62: 2. SYSTEM INITIALIZATION Note: If t
Page 65 and 66: 2. SYSTEM INITIALIZATION 4. Name is
Page 67 and 68: 2.7 Station List 2.7.1 Adding stati
Page 71 and 72: 2. SYSTEM INITIALIZATION Station li
Page 73 and 74: 2.9 Creating a Directory 2. SYSTEM
Page 75 and 76: 2. SYSTEM INITIALIZATION 2.9.2 Spec
Page 79 and 80: 2. SYSTEM INITIALIZATION 2.11 E-mai
Page 81 and 82: 3. FILE OPERATIONS This chapter des
Page 83 and 84: 3. FILE OPERATIONS 3.2.2 Preparing
Page 85 and 86: 3. FILE OPERATION File Edit Transmi
Page 87 and 88: 3. FILE OPERATIONS Insert (with Cit
Page 89 and 90: 3. FILE OPERATIONS 10. Press the [
Page 91 and 92: 3. FILE OPERATIONS 3.3.1 Formatting
Page 93 and 94: 3. FILE OPERATIONS Save file, clear
Page 95 and 96:
3. FILE OPERATIONS 3.4.3 Opening a
Page 97 and 98:
3. FILE OPERATION 3.6 Printing File
Page 99 and 100:
3. FILE OPERATIONS 3.9 Renaming Fil
Page 101 and 102:
3. FILE OPERATIONS 7. To change fi
Page 103 and 104:
4. INMARSAT C COMMUNICATIONS This c
Page 105 and 106:
4. INMARSAT C COMMUNICATIONS 3. Pre
Page 107 and 108:
4. INMARSAT C OPERATIONS (6) Press
Page 109 and 110:
4. INMARSAT C COMMUNICATIONS Note 3
Page 111 and 112:
Page 113 and 114:
4. INMARSAT C COMMUNICATIONS 7. Typ
Page 115 and 116:
4. INMARSAT C COMMUNICATIONS Commun
Page 117 and 118:
4. INMARSAT C COMMUNICATIONS 4.1.3
Page 119 and 120:
Page 121 and 122:
4. INMARSAT C COMMUNICATIONS Manual
Page 123 and 124:
4. INMARSAT C COMMUNICATIONS Mariti
Page 125 and 126:
4. INMARSAT C COMMUNICATIONS 4.2 Re
Page 127 and 128:
Page 129 and 130:
4. INMARSAT C COMMUNICATIONS About
Page 131 and 132:
Page 133 and 134:
4.3 Log 4. INMARSAT C COMMUNICATION
Page 135 and 136:
4.4 EGC Messages 4. INMARSAT C COMM
Page 137 and 138:
Page 139 and 140:
5. DATA REPORTING AND POLLING This
Page 141 and 142:
5. DATA REPORTING AND POLLING 13. C
Page 143 and 144:
5. DATA REPORTING AND POLLING 9. Pr
Page 145 and 146:
5. DATA REPORTING AND POLLING 5.1.3
Page 147 and 148:
5. DATA REPORTING AND POLLING • P
Page 149 and 150:
5. DATA REPORTING AND POLLING 5.2.3
Page 151 and 152:
6. DISTRESS OPERATIONS 6.1 Transmit
Page 153 and 154:
6. DISTRESS OPERATIONS 16.Press the
Page 155 and 156:
6. DISTRESS OPERATIONS 13. Press th
Page 157 and 158:
7. OTHER FUNCTIONS This chapter des
Page 159 and 160:
7.3 Choosing EGC Receiving Channel
Page 161 and 162:
7.5 LES Information 7. OTHER FUNCTI
Page 163 and 164:
8. E-MAIL BY PC 8.1 Overview The FE
Page 165 and 166:
8. E-MAIL BY PC • When a file wit
Page 167 and 168:
8. E-MAIL BY PC 8.3 Function Settin
Page 169 and 170:
8. E-MAIL BY PC 8.3.3 Gateway setti
Page 171 and 172:
8. E-MAIL BY PC 8.3.5 Restricting o
Page 173 and 174:
8. E-MAIL BY PC 8.3.7 Connection of
Page 175 and 176:
8. E-MAIL BY PC 8.3.8 Selective for
Page 177 and 178:
8. E-MAIL BY PC 8.4 E-mail Client S
Page 179 and 180:
9. MAINTENANCE, TROUBLESHOOTING Thi
Page 181 and 182:
9. MAINTENANCE, TROUBLESHOOTING Whe
Page 183 and 184:
9. MAINTENANCE, TROUBLESHOOTING 8.
Page 185 and 186:
9. MAINTENANCE, TROUBLESHOOTING DCE
Page 187 and 188:
9. MAINTENANCE, TROUBLESHOOTING 9.7
Page 189 and 190:
APPENDIX Menu Tree F1: File 1. New
Page 191 and 192:
APPENDIX B TECHNICAL DATA F5: Repor
Page 193 and 194:
APPENDIX F8: Setup 1. Distress Aler
Page 195 and 196:
APPENDIX 6. Auto Mode Setup Auto Lo
Page 197 and 198:
APPENDIX International Telex/Teleph
Page 199 and 200:
APPENDIX Area and Country Telephone
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
APPENDIX LES List April/2002 Land e
Page 207 and 208:
APPENDIX AP-19 International Telegr
Page 209 and 210:
APPENDIX 22. "Decode failed. " File
Page 211 and 212:
APPENDIX Digital Interface (IEC 611
Page 213 and 214:
APPENDIX BWR - Bearing and distance
Page 215 and 216:
APPENDIX GLL - Geographic position
Page 217 and 218:
APPENDIX RMB - Recommended minimum
Page 219 and 220:
APPENDIX VTG - Course over ground a
Page 221 and 222:
APPENDIX Serial interface I/O circu
Page 223 and 224:
APPENDIX F U R U N O Model FELCOM 1
Page 225 and 226:
APPENDIX Antenna unit ANT RF Board
Page 227 and 228:
FURUNO FELCOM 15 SPECIFICATIONS OF
Page 229 and 230:
INDEX A Aborting ..................
Page 231:
INDEX R Receiving attachments .....
show all

FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?