FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. DATA REPORTING AND POLLING<br />
This chapter provides the information necessary for data reporting and polling<br />
reception. Data reporting provides automatic data transmission at regular<br />
intervals from your ship to your home office. When your ship receives a polling<br />
command from your home office; that is, a request for navigation data from your<br />
ship, it automatically transmits this data to your home office.<br />
No operator intervention is required during polling reception.<br />
Satellite<br />
Data report<br />
Message report<br />
Polling<br />
Mobile Earth Station Land Earth Station Subscriber<br />
5.1 Data Reporting<br />
Data reporting provides automatic data transmission at predetermined intervals<br />
from your ship to your home office. The data are position, speed, bearing and<br />
other data sent from a navigator or an interface unit.<br />
The data transmitted from the <strong>FELCOM</strong> <strong>15</strong> is temporarily stored in a data<br />
reporting file at the LES. When an operator at your home office accesses the<br />
LES, the LES delivers the data to your home office. Some LESs may deliver it<br />
without being accessed.<br />
Data reporting can be initiated by setting a data report on the <strong>FELCOM</strong> <strong>15</strong> or<br />
receiving a polling command from your home office.<br />
<strong>FELCOM</strong> <strong>15</strong> offers two types of reports as follows:<br />
• Data report (on MES signaling channel)<br />
Refer to paragraph 5.1.1.<br />
• Message report (on MES message channel)<br />
Refer to paragraph 5.1.2.<br />
5-1