FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. SYSTEM INITIALIZATION<br />
Note: To restore all default color settings, choose Window Color from the<br />
Terminal Setup menu, choose Default Color, press the [Enter] key, and<br />
then press the [Enter] key again.<br />
<strong>15</strong>. Press the [Esc] key twice to return to the standby display.<br />
2.3 Login and Logout<br />
Each time the terminal unit is turned on, register your vessel with the Inmarsat C<br />
system to enable communications between your vessel and an LES. This is<br />
called login.<br />
Note that you can transmit the distress alert or receive EGC messages even if<br />
you are not logged in.<br />
If you will not be using the <strong>FELCOM</strong> <strong>15</strong> for a prolonged period, you should<br />
logout from the Inmarsat C system, before turning off the terminal unit. The<br />
Inmarsat C system will then register you as inactive, notifying anyone trying to<br />
call you that you are currently unavailable. If you do not log out before turning off<br />
the power, some LESs may attempt to send a message to you. They may<br />
charge your correspondent, even if you don’t receive the message.<br />
2.3.1 Login<br />
1. Confirm that “SYNC (NCS)” appears at the bottom of the screen.<br />
2. Press the [F7] key to display the Options menu.<br />
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm<br />
Options<br />
1. Login<br />
2. Logout<br />
3. Abort<br />
4. Select NCS<br />
5. Ocean Region<br />
6. LES Information<br />
7. Test<br />
Options menu<br />
3. Press the [1] key to display the Login screen.<br />
Options<br />
Login<br />
Start<br />
Yes<br />
No<br />
Login screen<br />
2-8
Change language