FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. SYSTEM INITIALIZATION<br />
This chapter provides the information necessary for initializing the <strong>FELCOM</strong> <strong>15</strong>.<br />
Once the equipment is initialized, you need do no more than press a few keys to<br />
get fully automatic transmission and reception.<br />
Inmarsat assigns an MES an Inmarsat Mobile Number (IMN) when it applies for<br />
Inmarsat registration. The IMN is necessary to communicate in the Inmarsat<br />
system. It is entered into the <strong>FELCOM</strong> <strong>15</strong> during the installation.<br />
2.1 System Settings<br />
2.1.1 Confirming the main terminal<br />
The main terminal is where you set up the system. (You cannot set up the<br />
system from an external terminal.) Confirm that the main terminal is selected as<br />
below.<br />
1. Press the [F8] key to choose the Setup menu.<br />
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm<br />
Setup<br />
1. Distress Alert Setup<br />
2. System Setup<br />
3. Editor Setup<br />
4. Terminal Setup<br />
5. EGC Setup<br />
6. Auto Mode Setup<br />
7. E-Mail Setup<br />
8. Directories<br />
9. Configuration<br />
Setup menu<br />
If your screen looks something like the one shown in the illustration above, you<br />
are using the main terminal. (If you are using an external terminal, some menu<br />
items appear in gray.)<br />
2-1
Change language