FELCOM 15 Operator's Manual K 7-10-09 - Furuno USA

3. FILE OPERATIONS
3.2 Preparing Files
There are two types of files: routine and confidential. Files can be assigned a file
name and saved to a floppy disk for later use. A message may contain maximum
32 Kbytes of characters.
3.2.1 Preparing a routine file
1. Press the [F1] key to display the File menu.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
1. New
2. Open
3. Close
4. Save
File
ALT-N
ALT-O
ALT-Q
ALT-S
5. Delete
6. Rename
7. Print
ALT-D
ALT-P
8. Format Disk
9. MIME (Decode)
File menu
2. Press the [1] key to choose New. The display should now look something like
the illustration below.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
0001|
Cursor can be a square or an underline.
----*---------+---------+---------+---------+---------+---------+---------<
TELEX
1 Char. [ Line 1/ 1 Col. 1 ] [Insert ]
Text editor screen
Note: When two working areas are opened and you try to open a third file,
the message “Save this message” appears. When this occurs close
an open file to free a working area.
3. The cursor is on the first line. Type your message.
4. To transmit the message you have just prepared, go to paragraph 4.1.2. To
save it to a floppy disk, for future transmission, go to paragraph 3.3.2.
3-2