Daelim B-Bone 125cc service manual.pdf - Mojo

LH.CRANK CASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
CLUTCH/DRIVEN PULLEY INSTALLATION
● Turning the driven pulley ass’y rightside, extend the
belt assemble groove maximum.
● Install the drive belt into driven pulley sub ass’y, install
the drive shaft.
● Install the drive belt into movable drive face..
DRIVEN ‚fi”
PULLEY
˙fi‚fi
DRIVE BELT
DRIVE FACE
● Install the drive face, rear axcel collar drive pulley nut.
● Tighten to the specified torque using drive face holder.
TORQUE VALVE : 7.0~8.0kgfm
TOOL : DRIVE FACE HOLDER
DRIVEN PULLEY
● Install the clutch onter into driven pulley sub ass’y and
flange nut.
● Hold the clutch outer using drive universal holder,
install the flange nut to the specified torque.
TORQUE VALVE : 5.5kgfm
TOOL : UNIVERSAL HOLDER
● Install the LH. crank case cover, and tighten the flange
bolt.
8-13