Daelim B-Bone 125cc service manual.pdf - Mojo

FRONT WHEEL/FRONT FORK/STEERING
STEERING HANDLE
INSTALLATION
● Align the line of the steering handle to the handle under
holder.
● Install the handle upper holder using the hexbolt, to the
specified torgue.
TORQUE : 3.92 - 4.9kgf·m
HANDLE UNDER HOLDER
! NOTE
Adjust the throttle grip free play to the
specified range of 2-6mm.
● Install in the reverse order of removal.
HANDLE UPPER HOLDER
FLANGE BOLT
FRONT CALIPER
FRONT WHEEL
REMOVAL
● Jack the motorcycle front wheel off the ground.
● Loosen the flange bolt securing the front caliper to
remove the caliper.
● Loosen the axle nut, speedometer cable setting screw
and remove the wheel.
DIAL GAUGE
FRONT AXLE
INSPECTION
AXLE RUNOUT
● Set the axle in V blocks and measure the runout using a
dial gauge.
● The actual runout is 1/2 of the total indicator reading.
SERVICE LIMIT : 0.2mm replace if over
13-4