Daelim B-Bone 125cc service manual.pdf - Mojo
Daelim B-Bone 125cc service manual.pdf - Mojo
Daelim B-Bone 125cc service manual.pdf - Mojo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REAR WINKER<br />
TAIL & STOP BULB<br />
REAR WINKER<br />
SPEEDOMETER<br />
LIGHTS/SWITCHES/HORN<br />
REAR TAIL LIGHT<br />
ASSEMBLY REPLACEMENT<br />
● Remove the rear upper cover.<br />
● Loosen the 2 screws securing the rear tail light.<br />
● Remove the coupler link to the tail light.<br />
● The tail light is LED light so, replace it with assembly<br />
parts.<br />
● Install in the reverse order of removal.<br />
△! NOTE<br />
●Pay attention not to damage the lens.<br />
●Do not apply excessive force when removing<br />
the lens.<br />
●Check the installation of the tail light and lens<br />
seal accurately.<br />
REAR WINKER<br />
BULB REPLACEMENT<br />
● Press the lock on the side of the winker base and<br />
remove the rear winker cover.<br />
● Remove the winker lens.<br />
● Remove the bulb from the socket and replace with a<br />
new bulb.<br />
● Install in the reverse order of removal.<br />
SPEEDOMETER<br />
REMOVAL<br />
● Remove the inner box.<br />
● Remove the headlight.<br />
● Remove the wiring coupler and speedometer cable.<br />
● Loosen the flange bolt securing the pilot box on the<br />
inner box and remove the speedometer set.<br />
SPEEDOMETER<br />
PILOT BOX<br />
● Loosen the bolt securing the pilot box from the<br />
speedometer set and remove the speedometer assembly.<br />
● Install in the reverse order of removal.<br />
19-3
Change language