Daelim B-Bone 125cc service manual.pdf - Mojo

BRAKE SYSTEM
RR. BRAKE LEVER
3 If no air leaks out of the breeder hose after operate
the brake lever, stop pumping it.
FR. BREEDER VALVE
FR. BRAKE HOSE
4 Connect the breeder hose to the breeder valve on
the front caliper and bleed air.
5 Fill the brake fluid up to the upper limit line and
install the diaphragm, plate and oil cup cap.
6 Install the fluid maintenance lid.
FLANGE BOLT
HANGER PIN
FRONT BRAKE PAD
REPLACEMENT
● Loosen the hanger pin on the front caliper.
△!
NOTE
●When replacing brake pads, replace whole set.
●Do not remove the brake hose when replacing brake
pads.
BRAKE PAD
● Remove the brake caliper from the front fork.
● Loosen the hanger pin from the brake pad.
● Install the hanger pin to the new brake pads.
● Install the brake caliper to the front fork.
15-5