Daelim B-Bone 125cc service manual.pdf - Mojo

BRAKE SYSTEM
RR. CALIPER
LOCK PLATE
REAR BRAKE PAD
REPLACEMENT
● Flatten the lock plate pawl and loosen the hanger pin.
HANGER PIN
△! NOTE
●When replacing brake pads, replace whole set.
●Do not remove the brake hose when replacing brake
pads.
RR. BRAKE PAD
PAD SPRING
● Loosen the rear brake bolt and remove the brake
caliper.
● Loosen the new brake pad, lock plate, hanger pin and
replace the pads.
● Install in the revers order of removal.
FR. CALIPER
FRONT BRAKE CALIPER
REMOVAL
● Drain the brake fluid.
● Loosen the oil bolt securing the brake hose.
● Loosen the 2 bolts securing the caliper.
△! NOTE
●Avoid spilling fluid on painted, plastic or rubber parts.
△!
CAUTION
●Keep oil off the brake disk or pad, because the
contaminated brake disk or pads reduce the braking
performance if contaminated. Replace the pad with a
new one and clean the disk.
15-6