Daelim B-Bone 125cc service manual.pdf - Mojo

A.C GENERATOR / STARTER CLUTCH
REDUCTION GEAR
STARTER REDUCTION GEAR
INSTALLATION
● Install the starter reduction gear and shaft.
● Remove the gasket residues from the RH. Crankcase.
GASKET
DOWEL PIN
● Install a new gasket and dowel pin.
● Tighten the RH. Crankcase cover with flang bolts.
● Install the following parts.
- A.C.Generator
- Cooling fan
- RH. Shroud
- Rear swing arm
- Rear caliper
- EX. Muffler
- Rear under cover
- Pillion step holder
STARTER CLUTCH
REMOVAL
● Remove the following parts.
- Rear under cover
- EX. Muffler
- Rear swing arm
- RH. Crankcase cover
RH CRANK CASE COVER
STARTING CLUTCH
● Loosen the starter clutch lock nut with a special socket.
TORQUE VALVE : 9.5kgf m
TOOL : SPECIAL SOCKET (12.7X28X120)
DRIVE FACE HOLDER
SPECIAL SOCKET
9-6