Daelim B-Bone 125cc service manual.pdf - Mojo

A.C GENERATOR / STARTER CLUTCH
SAI TUBE
RH. SHROUD
SHROUD
REMOVAL
● Remove the following parts.
- RR. Inner
- SAI Tube
- RH. / LH. Pillion step holder
- Muffler comp
SETTING SCREW
● Loosen the RH. shroud 4 flange bolts and 4 tapping
screws.
● Remove the RH. shroud.
● Loosen the LH. shroud setting screw.
● Remove the LH. shroud.
● Install in the reverse order of removal.
LH. SHROUD
SAI TUBE
A.C GENERATOR
REMOVAL
● Loosen the rear cushion under cover.
● Loosen the 3 bolts securing RH. shroud.
● Remove the SAI.
● Remove the shroud.
COOLING FAN
SAI REED VALVE
● Loosen the 3 cooling fan bolts.
● Remove the A.C.G. wiring from the A.C.G. wiring
setting clamp securing the engine and frame.
FLYWHEEL COMP
9-2