Daelim B-Bone 125cc service manual.pdf - Mojo

EMS(Engine Management System)
17.HOW TO USE THE SCAN WHEN
ECU IS INITIALIZED
●The coupler to check the malfunction of vehicle
is connected to the coupler of diagnostic tool.
●Turn the lgnition key on.
●Press the power button of the diagnostic tool.
●Press the enter button in the initial screen.
●Press the enter in the vehicle diagnosis screen.
●Press the enter button on the resetting ECU values.
●If the enter-key is press than the ECU will reset.
●Press the rest button on the following screen.
5-42