Daelim B-Bone 125cc service manual.pdf - Mojo

CHECK THE CIRCUIT OF CKP
●Fault code number is displayed by MIL
EMS(Engine Management System)
CHECKING CIRCUIT
GREEN
BLUE
BLUE
RED
ECU PIN NUMBER
30 : CRANK SIGNAL-A
22 : CRANK SIGNAL-B
CHECK PROCEDURE
1) Turn ON ignition key.
2) Check to see if the ENGINE SINK ON is ON or OFF with diagnosis tool.
When start up the ENGINE SINK ON change “OFF’ to “ON”, it’s okay.
Check if ENGINE SINK ON is OFF while start up.
- Remove the A.C. generator.
- If there are over 10 spots on the flywheel protrusion, replace it.
- Check the CKP is working or NOT (metal residue)
3) Turn OFF ignition key, check the breaking of A.C GEN CKP.
Check the A.C. GEN CKP resistance.
- measuring resistance : 80 ~ 150[]
5-37