Daelim B-Bone 125cc service manual.pdf - Mojo

FRONT WHEEL/FRONT FORK/STEERING
GEAR BOX RETAINER
● Apply grease to the dust seal rim.
● Install the dust seal, and align the tangs of the
speedometer gear retainer with the gear groove to
assemble the speedometer gear box.
SPEEDOMETER GEAR BOX
PART
FRONT WHEEL INSTALLATION
● Insert the front wheel between the front forks.
● Insert the disk, taking precautions not to damage the
pad, and assemble the wheel.
● Align the slots of the speedometer gear with the tangs
of the RH. fork slider.
● Insert the front axle into the speedometer gear box and
the wheel hub.
SPEEDOMETER GEAR BOX
● Install the axle nut.
● Install the speedometer cable, and tighten with screws.
● Place the front wheel on the ground, and tighten the
axle nut to the specified torque.
TORQUE VALUE : 5.0-7.0 kgf·m
AXLE NUT
FRONT CALIPER
FRONT FORK
REMOVAL
● Remove the following parts.
-Front brake caliper
-Front fender
-Front wheel
FRONT WHEEL AXLE
13-7