Daelim B-Bone 125cc service manual.pdf - Mojo
Daelim B-Bone 125cc service manual.pdf - Mojo
Daelim B-Bone 125cc service manual.pdf - Mojo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EMS(Engine Management System)<br />
DISASSEMBLE THE INSULATOR<br />
● Disconnect injector cap bolt.<br />
● Disconnect injector and injector cap at the<br />
same time from the insulator.<br />
● Disconnect injector and injector cap.<br />
INJECTOR CAP<br />
INJECTOR<br />
CHECKING THE INSULATOR<br />
● Check the O-ring.<br />
● Check the insulator inside.<br />
● Check the insulator cap inside.<br />
ASSEMBLY OF THE INSULATOR<br />
● Assemble is the reverse order of removal.<br />
● Assemble the O-ring to insulator.<br />
● Install the insulator to the throttle body.<br />
●Torque : 1.0 kgf m<br />
● Remove the injector and check.<br />
ASSEMBLY OF THE THROTTLE BODY<br />
● Assemble is the reverse order of removal.<br />
● Assemble the O-ring to the insulator.<br />
△! CAUTION<br />
● Replace the o-ring with new one.<br />
● Assemble the insulator to the throttle body.<br />
●Torque : 1.0 kgf m<br />
5-14<br />
INSTALLATION OF INSULATOR AND<br />
THROTTLE BODY<br />
● Installation of insulator and throttle body in the<br />
reverse order of removal.<br />
● Check the o-ring when the insulator assembly.<br />
● Assemble the insulator gasket.<br />
△<br />
! CAUTION<br />
● Replace the gasket with new one.<br />
● Install the assembled insulator and throttle<br />
body to the cylinder head.<br />
●Torque : 1.2 kgf m