Daelim B-Bone 125cc service manual.pdf - Mojo
Daelim B-Bone 125cc service manual.pdf - Mojo
Daelim B-Bone 125cc service manual.pdf - Mojo
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CHARGING SYSTEM<br />
BATTERY COVER<br />
BATTERY<br />
REMOVAL<br />
● Loosen the screws securing the battery cover and<br />
remove the battery cover.<br />
SCREW<br />
CABLE<br />
BATTERY<br />
CABLE<br />
● Remove the battery.<br />
● Disconnect the negative “⊖” battery cable first, and<br />
then disconnect the positive “⊕” cable.<br />
● The installation sequence is the reverse of removal.<br />
BATTERY (OPEN-CIRCUIT VOLTAGE) INSPECTION<br />
● Remove the battery cable.<br />
● Disconnect the battery terminals from the battery.<br />
● Measure the voltage between the battery terminals.<br />
FULLY CHARGED : 13.0-13.2V<br />
INSUFFICIENTLY CHARGED : UNDER 12.3V<br />
TOOL : DIGITAL TESTER<br />
△! NOTE<br />
●Use a voltmeter that will accurately indicate 0.1V<br />
difference.<br />
●When measuring the battery volate after driving, leave<br />
it for at least 30 minutes, or the accurate results cannot<br />
be obtained because the battery voltage fluctuates just<br />
driving.<br />
● Connect the charger positive (+) cable to the battery<br />
positive (+) terminal.<br />
● Connect the charger negative (-) cable to the battery<br />
negative (-) terminal.<br />
△!<br />
NOTE<br />
●The rapid charging could be possible to reduce the<br />
battery life and cause of damage.<br />
●Avoid the rapid charging except emergency.<br />
●Be sure to the battery charging is not allow to exceed<br />
the specified changing time and current.<br />
16-3
Change language