Installation Manual

Permanent replacement
The default configuration is not preserved when replacing permanently an IP Touch set by
another type of IP Touch set. The activation code and the replacement functions will be
refused.
The data downloading process is automatically activated and the correct files are selected.
4.14.1.1.3 Moving a handset
If you move office, you can move your set from one socket to another and still preserve all or
part of its settings.
Before relocating the set:
- You need to change the personal code, which must be different from the default code.
- It is advisable to lock the set.
Relocating a set to an unused socket
4.14.1.1.4 Adding sets
When adding sets, attention must be paid to the limits on the number of sets and the features
offered by the system software key.
The set is recognized as soon as it has been plugged into the socket.
4.14.1.1.5 Using a Multi Reflexes 4099 hub
Multi Reflexes 4099 option (also called Multiple UA hub) connects up to 3 Alcatel-Lucent 9
series or Alcatel Reflexes terminals to an Alcatel-Lucent OmniPCX Office Communication
Server using just one UA link. It simplifies the installation of additional Alcatel-Lucent 9 series
or Alcatel Reflexes terminals.
4-113