MIC1462 manual.pdf
MIC1462 manual.pdf
MIC1462 manual.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
To de-activate the Pre-Tune facility <strong>manual</strong>ly (with the instrument in<br />
Base Mode), press the MODE key to obtain the same Message Displays<br />
above; then press the DOWN key simultaneously to change the lower<br />
Main display from ON to OFF.<br />
3.13 USING THE SELF-TUNE FACILITY<br />
The Self-Tune facility is used to optimize tuning while the Controller part of<br />
the instrument is operating. Self Tune may be activated as follows:<br />
1. With the instrument in Base Mode (with RUN and HLD indicators<br />
OFF), press the MODE key until the Message Display shows:<br />
and the lower Main Display shows:<br />
2. Press the UP key to change the lower Main Display to:<br />
indicating that the Self-Tune facility is now activated. The AT indicator is<br />
on continuously.<br />
To de-activate the Self-Tune facility, press the MODE key to obtain the<br />
same Message Display as above; then press the DOWN key to change the<br />
lower Main Display from ON to OFF.<br />
Edition 1<br />
31 MIC 1462 Manual
Change language