MIC1462 manual.pdf

4d Deviation DeAlarm 1 If Alarm 1 is a ±(input range)
(High/Low) Deviation High/ from setpoint.
Alarm 1 Value Low alarm, Default = five
gives a value input range
above (positive units
value) or below
(negative value)
the setpoint. If
the process
variable deviates
from the setpoint
by a margin
greater than this
value, the alarm
becomes active
5 Alarm 1 Al1 Hyst Value defines a 1 unit to X units
Hysteresis hysteresis band where X = 10%
value on the "safe" of input span.
side of the Alarm
1value
6a Process High HiAlarm 2 If Alarm 2 is a Input Range
Alarm 2 value process high Max to input
alarm, process Range Min.
variable at or Default=Input
above which Range Max.
Alarm 2 will
be active
6b Process Low LoAlarm 2 If Alarm 2 is a Input Range
Alarm 2 value process low Max to input
alarm, process Range Min.
variable at or Default=Input
below which Range Min.
Alarm 2 will
be active
Edition 1
51 MIC 1462 Manual