MIC1462 manual.pdf
MIC1462 manual.pdf
MIC1462 manual.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
controlled<br />
externally<br />
nonE=No<br />
external<br />
selection<br />
SEL=Program<br />
selection only<br />
run=Only Run<br />
Hold,Abort,<br />
and x60<br />
functions<br />
both=All program<br />
selection<br />
and run<br />
control functions<br />
* The Final Setpoint value for the End Segment of each program.<br />
** Only if real-time clock is fitted.<br />
*** Only if external options are fitted.<br />
7.3 PARAMETERS WHICH APPLY TO A SPECIFIC PROGRAM<br />
AS A WHOLE<br />
Only the parameters relevant to the displayed program number (which can<br />
be changed using the PROG key) are presented. The parameter sequence<br />
is as follows:<br />
To view parameters in the Program category, press the PROF key until the<br />
desired Program Number is displayed. Press the RUN/HOLD key until the<br />
Segement Number shown is blank.<br />
MESSAGE<br />
AVAILABLE<br />
STEP DESCRIPTION DISPLAY FUNCTION SETTING<br />
1 Cycle Count Cycles Defines the 1 - 9999<br />
number of Program will<br />
times the repeat the set<br />
program will number of<br />
be repeated of times<br />
MIC 1462 Manual 62<br />
Edition 1
Change language