MIC1462 manual.pdf

7.2 PARAMETERS COMMON TO ALL PROFILES
(Program Number = A, Segment Number = Blank)
The parameters common to all programs (global parameters) are presented
for edit/viewing in the following sequence:
To view the parameters in the Global category, press the PROF key until
the Program Number shown is "A". Press the RUN/HOLD key until the
segment Number shown is blank. Press the SCROLL key.
MESSAGE
AVAILABLE
STEP DESCRIPTION DISPLAY FUNCTION SETTING
1 Start On Start on Defines SEtP-Current
setpoint value Controller
at start of setpoint value
each program
Proc-Current
Process
variable value
2 Go To Go To Defines ON= Outputs
Basemode are active
Status at end OFF=Outputs
of each are inactive
program
3 End On End on Defines F_SP-End on
setpoint value Final SP value
at end of value*
each program
SEtP-End on
Controller SP
value
Edition 1
59 MIC 1462 Manual