MIC1462 manual.pdf
MIC1462 manual.pdf
MIC1462 manual.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 2 - Installation & Wiring<br />
2.1 UNPACKING PROCEDURE<br />
1. Remove the instrument from its packing. The instrument is supplied<br />
with a panel gasket and push-fit strap. Retain the packing for future use,<br />
should it be necessary to transport the instrument to a different site or<br />
return it to the factory for repair/testing.<br />
2. Examine the delivered items for damage or deficiencies. If any is<br />
found, notify the carrier immediately. Check that the model number<br />
shown on the label affixed to the instrument housing corresponds to that<br />
ordered (see Appendix D).<br />
2.2 PANEL-MOUNTING THE SETPOINT PROGRAMMER<br />
The panel on which the instrument is to be mounted must be rigid and may<br />
be up to 6.0 mm (.25 inches ) thick. The cutout required for a single instrument<br />
is shown in Figure 2-1.<br />
FIGURE 2-1<br />
Cut-Out Dimensions<br />
92 mm +0.5 - 0.00<br />
(3.62”+.020 - .000)<br />
PANEL<br />
CUTOUT<br />
SIZE<br />
92 mm + 0.5 - 0.0<br />
(3.62” + .020 - .000)<br />
Edition 1<br />
3 MIC 1462 Manual