Agilent 33120A User's Guide

Chapter 3 Features and FunctionsArbitrary Waveforms¿4 Move down a level to the “PARAMETER” choices.The first parameter choice is “CLEAR MEM” for the NEW ARB command.If you have previously downloaded any user-defined waveforms, you willalso see commands like “GET ARB1” on this level (to load the specifiedwaveform into volatile memory).CLEAR MEMEnter5 Turn on the waveform edit mode.The function generator beeps and displays a message to show that thewaveform edit mode is now enabled. You are then exited from the menu.LOADINGShift7 Move across to the POINTS command on this level.2: POINTS¿8 Move down a level and set the number of points to “400”.¾00400 PNTS104