Agilent 33120A User's Guide

ContentsChapter 1 Quick StartTo prepare the function generator for use 15If the function generator does not turn on 16To adjust the carrying handle 18To set the output frequency 19To set the output amplitude 20To set a dc offset voltage 21To set the duty cycle 22To output a stored arbitrary waveform 23To output a dc voltage 24To store the instrument state 25To rack mount the function generator 27Chapter 2 Front-Panel Menu OperationFront-panel menu reference 31A front-panel menu tutorial 33To select the output termination 40To output a modulated waveform 41To output an FSK waveform 44To output a burst waveform 47To output a frequency sweep 49To trigger a burst or sweep 51To turn off the comma separator 52ContentsChapter 3 Features and FunctionsOutput Configuration 55Amplitude Modulation (AM) 71Frequency Modulation (FM) 76Burst Modulation 81Frequency-Shift Keying (FSK) Modulation 90Frequency Sweep 94Triggering 98Arbitrary Waveforms 103System-Related Operations 109Remote Interface Configuration 114Calibration Overview 118Power-On and Reset State 1239