Agilent 33120A User's Guide

More documents

Recommendations

Info

Chapter 1 Quick StartIf the function generator does not turn onIf the function generator does not turn onUse the following steps to help solve problems you might experiencewhen turning on the function generator. If you need more help, see theService Guide for instructions on returning the function generator toAgilent for service.1 Verify that there is ac power to the function generator.First, verify that the function generator’s Power switch is in the“On” position. Also, make sure that the power cord is firmly plugged intoto the power module on the rear panel. You should also make sure thatthe power source you plugged the function generator into is energized.2 Verify the power-line voltage setting.The line voltage is set to the proper value for your country when thefunction generator is shipped from the factory. Change the voltagesetting if it is not correct. The settings are: 100, 120, 220, or 240 Vac(for 230 Vac operation, use the 220 Vac setting).See the next page if you need to change the line-voltage setting.3 Verify that the power-line fuse is good.The function generator is shipped from the factory with a 500 mAT fuseinstalled. This is the correct fuse for all line voltages.See the next page if you need to change the power-line fuse.To replace the 500 mAT fuse, order Agilent part number 2110-0458.16
Chapter 1 Quick StartIf the function generator does not turn on11 Remove the power cord. Remove thefuse-holder assembly from the rear panel.2 Remove the line-voltage selector fromthe assembly.Fuse: 500 mAT (for all line voltages)Part Number: 2110-04583 Rotate the line-voltage selector until thecorrect voltage appears in the window.4 Replace the fuse-holder assembly inthe rear panel.100, 120, 220 (230), or 240 VacVerify that the correct line voltage is selected and the power-line fuse is good.17
Page 6 and 7: The Front-Panel Menu at a GlanceThe
Page 8 and 9: The Rear Panel at a Glance1 Chassis
Page 11 and 12: ContentsChapter 1 Quick StartTo pre
Page 13 and 14: ContentsChapter 6 Application Progr
Page 15 and 16: 11Quick Start
Page 17: Chapter 1 Quick StartTo prepare the
Page 21 and 22: Chapter 1 Quick StartTo set the out
Page 23 and 24: Chapter 1 Quick StartTo set a dc of
Page 25 and 26: Chapter 1 Quick StartTo output a st
Page 27 and 28: Chapter 1 Quick StartTo store the i
Page 29 and 30: Chapter 1 Quick StartTo rack mount
Page 31 and 32: 22Front-PanelMenu Operation
Page 33 and 34: Chapter 2 Front-Panel Menu Operatio
Page 45: Chapter 2 Front-Panel Menu Operatio
Page 56 and 57: Features and FunctionsYou will find
Page 58 and 59: Chapter 3 Features and FunctionsOut
Page 68 and 69:
Chapter 3 Features and FunctionsOut
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Chapter 3 Features and FunctionsAmp
Page 76 and 77:
Chapter 3 Features and FunctionsAmp
Page 78 and 79:
Chapter 3 Features and FunctionsFre
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Chapter 3 Features and FunctionsBur
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Chapter 3 Features and FunctionsTri
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Chapter 3 Features and FunctionsArb
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Chapter 3 Features and FunctionsSys
Page 114 and 115:
Chapter 3 Features and FunctionsSys
Page 116 and 117:
Chapter 3 Features and FunctionsRem
Page 118 and 119:
Chapter 3 Features and FunctionsRem
Page 120 and 121:
Chapter 3 Features and FunctionsCal
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
124
Page 128 and 129:
Remote Interface Referenceœ SCPI C
Page 130 and 131:
Chapter 4 Remote Interface Referenc
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
226
Page 230 and 231:
Error Messagesœ Errors are retriev
Page 232 and 233:
Chapter 5 Error MessagesExecution E
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Chapter 5 Error MessagesCalibration
Page 242 and 243:
Chapter 5 Error MessagesArbitrary W
Page 244 and 245:
242
Page 246 and 247:
Application ProgramsThis chapter co
Page 248 and 249:
Chapter 6 Application ProgramsC Lan
Page 250 and 251:
Chapter 6 Application ProgramsUsing
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Chapter 6 Application ProgramsDownl
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
270
Page 274 and 275:
TutorialThe Agilent 33120A is capab
Page 276 and 277:
Chapter 7 TutorialDirect Digital Sy
Page 278 and 279:
Chapter 7 TutorialSignal Imperfecti
Page 280 and 281:
Chapter 7 TutorialCreating Arbitrar
Page 282 and 283:
Chapter 7 TutorialOutput Amplitude
Page 284 and 285:
Chapter 7 TutorialFloating Signal G
Page 286 and 287:
Chapter 7 TutorialAttributes of AC
Page 288 and 289:
Chapter 7 TutorialAttributes of AC
Page 290 and 291:
Chapter 7 TutorialModulationIn ampl
Page 292 and 293:
Chapter 7 TutorialModulationFrequen
Page 294 and 295:
Chapter 7 TutorialModulationFor tri
Page 296 and 297:
Chapter 7 TutorialModulationYou can
Page 298 and 299:
Chapter 7 TutorialModulationœ Set
Page 300 and 301:
Chapter 8 SpecificationsAgilent 331
Page 302 and 303:
Chapter 8 SpecificationsAgilent 331
Page 304 and 305:
302
Page 306 and 307:
IndexIndexCC examples, 244cables (R
Page 308 and 309:
IndexIndexinterface (remote)selecti
Page 310 and 311:
IndexIndexstringcalibration, 122dis
Page 312:
È Copyright Agilent Technologies,
show all

Agilent 33120A User's Guide

Create successful ePaper yourself

Delete template?

Save as template?