Agilent 33120A User's Guide

Chapter 1 Quick StartTo store the instrument state1To store the instrument stateYou can store up to three different instrument states in non-volatilememory. This enables you to recall the entire instrument configurationwith just a few key presses from the front panel. The following stepsshow you how to store and recall a state.ShiftStore1 Set up the function generator to the desired configuration.The state storage feature “remembers” the function, frequency,amplitude, dc offset, duty cycle, as well as any modulation parameters.2 Turn on the state storage mode.Three memory locations (numbered 1, 2, and 3) are available to storeinstrument configurations. The instrument configuration is stored innon-volatile memory and is remembered when power has been off.¾STORE 1This message appears on the display for approximately 10 seconds.Repeat this step as needed.13 Store the instrument state in memory location “2”.Use the up and down arrow keys to select the memory location.STORE 2To cancel the store operation, press Shiftdisplay time-out after 10 seconds.Store again or let theEnter4 Save the instrument state.The instrument state is now stored. To recall the stored state, turn to thenext page.1 You can also use the knob or “enter number” mode to enter a memory location.See “Front-Panel Number Entry” on page 3 for more information.25