Agilent 33120A User's Guide

Chapter 4 Remote Interface ReferenceTo set the baud rateTo set the baud rateYou can select one of six baud rates for RS-232 operation. The rate is setto 9600 baud when the function generator is shipped from the factory.See also “Baud Rate Selection,” on page 116.ShiftMenu On/Off1 Turn on the menu.A: MOD MENU3 Move down a level and then across to the BAUD RATE choice.3: BAUD RATE¿4 Move down to the “PARAMETER” level to select the baud rate.Use the left/right arrow keys to see the baud rate choices. Choose fromone of the following: 300, 600, 1200, 2400, 4800, or 9600 baud.9600 BAUDEnter5 Save the change and exit the menu.The baud rate selection is stored in non-volatile memory, and does notchange when power has been off or after a remote interface reset.219